English
Zurcon® Rimseal is an elastomer energized seal element. The changes in seal position in the groove, necessary for optimum sealing function, are guaranteed by the combination of the two parts: the O-Ring and seal ring. In order to achieve a contact force increasing sealing effect with increasing pressure, the seal has a chamfer on the low pressure side which causes the seal to tilt slightly so that the seal ring is forced against the side of the groove. This creates an area of maximum pressure at the edge of the seal. The O-Ring is not included with this item.
Piston/Rimseal/Zurcon®:
TSS Article Number (3 to 9)1400500
Signature StandardPR1400500-Z53
Type of Article0
Quality (10th Digit)-
Root Groove Thickness5.35 mm
Root Groove Inside Diameter39.3 mm
Root Groove Outside Diameter50 mm
Root Ring Inside Diameter44.9 mm
Root Groove Width4.2 mm
Groove Diameter Inside39.3 mm
Groove Diameter Outside50 mm
Groove Width4.2 mm
Groove Thickness5.35 mm
Ring Thickness2.5 mm
Ring Width4 mm
Legacy ID from KOM2PR1400500-Z53
Root Ring Width4 mm
Root Ring Outside Diameter49.9 mm
Article GroupPR
Root Ring Thickness2.5 mm
Seals Helsingor Material Class:
Seal Tube OD Tolerance From51.2 mm
Material Number200000041082
Seal Tube OD Tolerance Max16 mm
Seal Tube ID Tolerance Min-16 mm
Seal Tube ID Tolerance Max-1.3 mm
Seal Tube OD Tolerance To65.9 mm
Seal Tube ID Tolerance To43.6 mm
Seal Tube ID Tolerance From28.9 mm
Class Dependencies200000041082
Ring Diameter Outside49.9 mm
Compound codeZ53
Ring Diameter Inside44.9 mm
Compound Type110
Seal Tube OD Tolerance Min1.3 mm
Material Information for the product(s) on this page
Z53
Shore D Hardness:
70+/- 6
Hardness unit:
Shore D
Material:
Z53
Material Type:
PUR
Material Code Class:
Thermoplastic
Gravity Tolerance:
+/-0.02
Gravity Unit:
g/cm³
Minimum Temperature:
-45
Maximum Hardness:
70
Color:
Yellow to Light-Brown
Specific Gravity:
1.18
Minimum Hardness:
70
Hardness Tolerance:
+/- 6
Maximum Temperature:
110