English
Zurcon® Rimseal is an elastomer energized seal element. The changes in seal position in the groove, necessary for optimum sealing function, are guaranteed by the combination of the two parts: the O-Ring and seal ring. In order to achieve a contact force increasing sealing effect with increasing pressure, the seal has a chamfer on the low pressure side which causes the seal to tilt slightly so that the seal ring is forced against the side of the groove. This creates an area of maximum pressure at the edge of the seal. The O-Ring is not included with this item.
Piston/Rimseal/Zurcon®:
TSS Article Number (3 to 9)1400550
Signature StandardPR1400550-Z54
Type of Article0
Quality (10th Digit)-
Root Groove Thickness5.35 mm
Root Groove Inside Diameter44.3 mm
Root Groove Outside Diameter55 mm
Root Ring Inside Diameter49.9 mm
Root Groove Width4.2 mm
Groove Diameter Inside44.3 mm
Groove Diameter Outside55 mm
Groove Width4.2 mm
Groove Thickness5.35 mm
Ring Thickness2.5 mm
Ring Width4 mm
Legacy ID from KOM2PR1400550-Z54
Root Ring Width4 mm
Root Ring Outside Diameter54.9 mm
Article GroupPR
Root Ring Thickness2.5 mm
Seals Helsingor Material Class:
Seal Tube OD Tolerance From56.2 mm
Material Number200000041083
Seal Tube OD Tolerance Max16 mm
Seal Tube ID Tolerance Min-16 mm
Seal Tube ID Tolerance Max-1.3 mm
Seal Tube OD Tolerance To70.9 mm
Seal Tube ID Tolerance To48.6 mm
Seal Tube ID Tolerance From33.9 mm
Class Dependencies200000041083
Ring Diameter Outside54.9 mm
Compound codeZ54
Ring Diameter Inside49.9 mm
Compound Type110
Seal Tube OD Tolerance Min1.3 mm
Material Information for the product(s) on this page
Z54
Zurcon Z54 material specificationZ54 Engineering DataZ54
Color:
Turquoise
Material Type:
PUR
Minimum Temperature:
-45
Gravity Tolerance:
+/-0.02
Specific Gravity:
1.16
Gravity Unit:
g/cm³
Material:
Z54
Maximum Temperature:
110
Material Code Class:
Thermoplastic
Maximum Hardness:
58
Hardness Tolerance:
+/- 4
Hardness unit:
Shore D
Shore D Hardness:
58+/- 4
Minimum Hardness:
58